2025 JLG® Articulating 450 Series 450AJ HC3

Information

2025 JLG® Articulating 450 Series 450AJ HC3

Get more flexibility at height with the JLG 450AJ HC3. With three working zones and enhanced capacity, up to three workers and tools can fit into the platform.

An efficient zero calibration automatic load sensing system eliminates the need for external weights to calibrate the machine. Operators benefit from enhanced features, like an upgraded light panel that's more visible in the sun and a chassis tilt alarm that alerts when the machine is on a slope exceeding 5 degrees.

The JLG 450AJ HC3 also includes a standard LED Motion/Amber Beacon with ClearSky Smart Fleet Connectivity Hardware.

Photos

Highlights

  • Albert Lea, Minnesota
  • 2025
  • JLG®
  • Articulating 450 Series 450AJ HC3
  • Available
  • Platform: 30 in / 0.76 m | Machine: 7 ft 8.6 in / 2.35 m
  • Up and Over: 24 ft / 7.3 m | Machine: 7 ft 5.3 in / 2.27 m

Specifications

  • 2025
  • JLG®
  • Articulating 450 Series
  • 450AJ HC3
  • Articulating
  • Dual Fuel: Kubota | Diesel Fuel: Deutz
  • Dual Fuel: WG2503 | Diesel Fuel: D2.9L4 Tier 4 Final
  • Dual Fuel: 61 hp / 45.5 kW | Diesel Fuel: 49 hp / 36.4 kW
  • Standard: Foam Filled, 33 x 12 D610
  • Auxiliary Power: 12V DC
  • Gradeability 4WD: 45%
  • Max. Bearing: 76 psi / 5.34 kg/cm²
  • Drive: 4.25 mph / 6.8 km/h
  • Horizontal Outreach: 25 ft / 7.62 m | Swing: 355 Degrees Non-Continuous | Platform Size: 30 x 72 in / 0.76 x 1.83 m | Jib: 4 ft 1 in / 1.24 m | Range of Articulation: 145 Degrees (+76, -69) | Tilt Cut Out: 5 Degrees | Axle Oscillation: 4 in / 10 cm
  • Up and Over: 24 ft / 7.3 m | Machine: 7 ft 5.3 in / 2.27 m
  • Platform: 72 in / 1.83 m | Machine: 21 ft 6.9 in / 6.57 m
  • Platform: 30 in / 0.76 m | Machine: 7 ft 8.6 in / 2.35 m
  • 45 ft / 13.72 m
  • Inside: 6 ft 9 in / 2.06 m | Outside: 15 ft 8 in / 4.78 m
  • 7 ft 9 in / 2.36 m
  • 16.4 in / 41.7 cm
  • 16 gal / 60.6 L | 15 gal / 56.8 L
  • Restricted 750/1000 lb / 340/454 kg | Unrestricted 660 lb / 300 kg
  • System: 17.3 gal / 65.5 L
  • 16,550 lb / 7,507 kg
  • Features three working zones for enhanced capacity; up to three workers and tools can fit onto the platform | Utilizes an upgraded light panel that is more visible in the sun and a chassis tilt alarm that alerts the operator when the machine is on a slope that exceeds 5 Degrees. | Delivers a zero calibration automatic load sensing system that eliminates the need to use external weights to calibrate the machine. | Available accessories and options provide the flexibility to upfit the machine to meet unique job requirements. | 4-ft 1-in (1.24-m) Articulating Jib | 5 Degree Tilt Alarm/ Indicator Light | 12V-DC Auxiliary Power | 110V-AC Receptacle in the Platform | Cast Aluminum Control Box | Center Storage Tray | ClearSky Smart Fleet™ Hardware (CS550) | Control ADE® System | Four-Wheel Hydrostatic Drive | Gull-Wing Turntable Hoods | Horn | Hourmeter | Improved Multi-Function Controls | LED Motion/Amber Beacon (CS550) | Lifting/Tie Down Lugs | Load Sensing System | Motion Alarm | Oscillating Axle | Platform Console Machine Status Light Panel | Proportional Controls | Rapid Replaceable Platform with Self-Closing Gate | SkyGuard SkyLine™ | Swing-Out Engine Tray | USB-A and USB-C Charger
  • We provide coverage for one (1) full year, and cover all specified-major structural components for five (5) years. Due to continuous product improvements, we reserve the right to-make specification and/or equipment changes without prior notification. This-machine-meets or exceeds applicable ANSI and CSA requirements based on-machine configuration as originallymanufactured for intended applications. Please reference the serial number plate on the-machine for additional information.