Sanco Equipment

  • 2317 Consul St.
  • Albert Lea, MN 56007
  • Call Us: (507) 373-4490
  • https://www.sancoequipment.com/
Print This Page

2025 JLG® Articulating E450 Series E450AJ

Information

2025 JLG® Articulating E450 Series E450AJ

Designed for efficiency and versatility in your workspace, the JLG E450AJ delivers greater accessibility with up-and-over access and an jib for hard-to-reach areas.

The Automatic Traction Control lets you easily maneuver over uneven, challenging surfaces. And with longer duty cycles, this boom lift maximizes productivity without interruption.

The JLG E450AJ is environmentally-friendly with zero emissions.

Photos

Highlights

  • Albert Lea, Minnesota
  • 2025
  • JLG®
  • Articulating E450 Series E450AJ
  • Available
  • Platform: 30 in / 76 cm | Machine: 5 ft 9 in / 1.75 m
  • Machine: 6 ft 7 in / 2.01 m

Specifications

  • 2025
  • JLG®
  • Articulating E450 Series
  • E450AJ
  • Articulating
  • Motor: Dual Electric Traction
  • Standards: In240/55D17.5 Foam-Filled Non-marking
  • 8 x 6V, 375 amp-hr
  • System: 48V DC
  • Gradeability: 30%
  • Bearing: 110 psi / 7.6 kg/cm²
  • Max Drive: 4.5 mph / 7.2 km/h
  • Motor/pump: Permanent Magnet Motor/Gear Pump
  • Horizontal Outreach: 23 ft 9 in / 7.24 m | Up and Over Clearance: 25 ft 3 in / 7.7 m | Swing: 360 Degrees Non-Continuous | Platform Rotator: 180 Degrees Hydraulic | Jib Range of Articulation (Vertical): 141 Degrees (+86, -55)
  • Machine: 6 ft 7 in / 2.01 m
  • Platform: 60 in / 1.52 m | Machine: 2 ft 2 in / 6.45 m
  • Platform: 30 in / 76 cm | Machine: 5 ft 9 in / 1.75 m
  • Platform: 45 ft / 13.72 m
  • Inside (2WS/4WS): 2 ft / .61 m | Outside (2WS/4WS): 10 ft 4 in / 3.15 m
  • 6 ft 7 in / 2.01 m
  • 8 in / 20 cm
  • Platform: 500 lb / 227 kg
  • 4 gal / 15.14 L
  • 14,400 lb / 6,532 kg
  • Maximum maneuverability by moving over uneven surfaces with Automatic Traction Control. | Achieve optimum productivity with longer duty cycles. | Produces zero emissions, 100% environmentally friendly | Enhanced up and over access with jib. | 110V-AC Receptacle in the Platform | 12V DC Auxilliary Power | 180 Degree Hydraulic Platform Rotator | 3 Degree Tilt Cut-out | 30 x 60-in Platform | All Motion Alarm | Automatic Traction Control (ATC) | Battery Condition Indicator | Brushless AC Motors | Center Storage Tray | ClearSky Smart Fleet™ Hardware (CS550) | Horn | Hourmeter | LED Motion/Amber Beacon (CS550) | Lifting/Tie Down Lugs | Load Sensing System | Platform Console Machine Status Light Panel | Rapid Replaceable Platform with Self-Closing Gate | SkyGuard SkyLine™ | Tilt Light and Alarm | USB-A and USB-C Charger
  • We provide coverage for one (1) full year, and cover all specified major structural components for five (5) years. Due to continuous product improvements, we reserve the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds applicable ANSI and CSA requirements based on machine configuration as originally manufactured for intended applications. Please reference the serial number plate on the machine for additional information.