2025 JLG® ES Series ES2632

Information

2025 JLG® ES Series ES2632

The JLG ES2632 electric scissor lift delivers double the battery life compared to a competitive model under similar test conditions, so you can run longer on a single charge. And, for increased maneuverability, the machine's narrow width fits through most standard doorways and tight aisles.

Photos

Highlights

  • Albert Lea, Minnesota
  • 2025
  • JLG®
  • ES Series ES2632
  • Available
  • Platform: 25.4 in / .7 m | Machine: 32 in / 81 cm
  • Maximum Drive (Indoor): 25 ft 5 in / 7.8 m | Maximum Drive (Outdoor): 21 ft / 6.4 m | Machine (Rails Raised): 88.2 in / 2.2 m | Machine (Rails Lowered): 70.3 in / 1.8 m

Specifications

  • 2025
  • JLG®
  • ES Series
  • ES2632
  • General
  • Electric
  • Multi-Disc Friction
  • Standard: 16 x 5-in / 406 x 125-mm
  • 4 x 6V 220 amp-hr | Drive: 24V AC
  • Multi-Function Universal Charge: 27 amp
  • Number of Occupants (Indoor/Outdoor): 2/1 | Gradeability (Indoor/Outdoor): 25%/25%
  • Max. Bearing (Indoor): 107 psi / 7.5 kg/cm² | Max. Bearing (Outdoor): 107 psi / 7.5 kg/cm²
  • Lift / Lower Time (No Load) Indoor: 33/36 seconds | Lift / Lower Time (No Load) Outdoor: 33/36 seconds | Lift / Lower Time (Rated Load) Indoor: 39/29 seconds | Lift / Lower Time (Rated Load) Outdoor: 39/29 seconds | Drive (Lowered) Indoor: 2.75 mph / 4.4 km/h | Drive (Lowered) Outdoor: 2.75 mph / 4.4 km/h | Drive (Raised) Indoor: 0.5 mph / 0.8 km/h | Drive (Raised) Outdoor: 0.5 mph / 0.8 km/h
  • Fixed Displacement Gear
  • LED Motion/Amber Beacon (CS550) | Tilt Alarm and Light
  • Max Tilt Rating (Side-to-Side) Indoor: 1.5 Degrees | Max Tilt Rating (Side-to-Side) Outdoor: 1.5 Degrees | Max Tilt Rating (Fore and Aft) Indoor: 3.5 Degrees | Max Tilt Rating (Fore and Aft) Outdoor: 3.5 Degrees | Platform Extension: 34 in / 86.5 cm
  • Maximum Drive (Indoor): 25 ft 5 in / 7.8 m | Maximum Drive (Outdoor): 21 ft / 6.4 m | Machine (Rails Raised): 88.2 in / 2.2 m | Machine (Rails Lowered): 70.3 in / 1.8 m
  • Platform: 84 in / 2.1 m | . Machine: 94.3 in / 2.4 m
  • Platform: 25.4 in / .7 m | Machine: 32 in / 81 cm
  • Elevated (Indoor): 25 ft 5 in / 7.8 m | Elevated (Outdoor): 21 ft / 6.4 m | Lowered: 43.6 in / 1.1 m | Railing: 44.6 in / 1.13 m
  • Outside (Inside): 88.2 in / 2.24 m | Outside (Outside): 88.2 in / 2.24 m
  • 74 in / 1.9 m
  • 3.9 in / 9.8 cm
  • Platform (Indoor): 507 lb / 230 kg | Platform (Outdoor): 275 lb / 125 kg | on Platform Extension (Indoor): 265 lb / 120 kg | on Platform Extension (Outdoor): 265 lb / 120 kg
  • 3.2 gal / 12 L
  • 4,400 lb / 1,996 kg
  • Available with CleanGuard leak containment system, allowing for work on sensitive flooring. | Delivers narrow width to fit through most standard doorways and tight aisles | Reduce operating costs with electric drive and integrated components containing reduced hydraulic hoses and hydraulic fittings on the entire machine. Meaning, increased uptime as well as fewer leaks and service calls | Run longer on a single charge with double the battery life. | AC Receptacle in Platform | Active Pothole Protection System | All Motion Alarm | Analyzer Port for Diagnostics | Battery Condition Indicator | CAN-Enabled Charger | ClearSky Smart Fleet™ Hardware (CS550) | Dynamic Braking | Foot-Actuated Deck Extension | Fork Lift Pockets | Greaseless Kingpin Joints | Horn | Hourmeter | Lanyard Attach Points | Lifting and Tie Down Points | Load Sensing System | Lubrication Free Scissor Arm Bushings | Manual Descent Cable | Movable, Removable Platform Control | Proportional Controls | QuikFold Rails | Removable Ladder | Scissor Maintenance Prop | Self-Closing Gate | Steel Swing-Out Doors | USB Charger & Phone Holder | Variable Tilt Visual Zone Indicator
  • Diamond Tread Steel Deck | Nickel Plated Pins
  • We provide coverage for one (1) full year, and cover all specified major structural components for five (5) years. Due to continuous product improvements, we reserve the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds applicable ANSI and CSA requirements based on machine configuration as originally manufactured for intended applications. Please reference the serial number plate on the machine for additional information.