Sanco Equipment

  • 2317 Consul St.
  • Albert Lea, MN 56007
  • Call Us: (507) 373-4490
  • https://www.sancoequipment.com/
Print This Page

2025 JLG® ES Series ES3246

Information

2025 JLG® ES Series ES3246

The JLG ES3246 electric scissor lift delivers double the battery life compared to a competitive model under similar test conditions, allowing you to run longer on a single charge. The available CleanGuard leak containment system enables work on sensitive flooring.

Photos

Highlights

  • Albert Lea, Minnesota
  • 2025
  • JLG®
  • ES Series ES3246
  • Available
  • Platform: 41.6 in / 1.1 m | Machine. 46 in / 117 cm
  • Machine (Rails Raised): 96.3 in / 2.5 m | Machine (Rails Lowered): 77.6 in / 2.0 m

Specifications

  • 2025
  • JLG®
  • ES Series
  • ES3246
  • General
  • Electric
  • Multi-Disc Friction
  • Standard: 16 x 5-in / 406 x 125-mm
  • 4 x 6V 220 amp-hr | Drive: 24V AC
  • Multi-Function Universal Charger: 27 amp
  • Number of Occupants (Indoor/Outdoor): 2/1 | Maximum Drive Height (Indoor/Outdoor): Fully Elevated/Fully Elevated | Gradeability (Indoor/Outdoor): 25%/25%
  • Max. Ground Bearing (Indoor): 140 psi / 9.8 kg/cm² | Max. Ground Bearing (Outdoor): 140 psi / 9.8 kg/cm²
  • Lift / Lower Time (No Load) Indoor: 50/44 seconds | Lift / Lower Time (No Load) Outdoor: 50/44 seconds | Lift / Lower Time (Rated Load) Indoor: 58/37 seconds | Lift / Lower Time (Rated Load) Outdoor: 58/37 seconds | Drive (Lowered) Indoor: 3 mph / 4.8 km/h | Drive (Lowered) Outdoor: 3 mph / 4.8 km/h | Drive (Raised) Indoor: 0.5 mph / 0.8 km/h | Drive (Raised) Outdoor: 0.5 mph / 0.8 km/h
  • Fixed Displacement Gear
  • LED Motion/Amber Beacon (CS550)
  • Max Tilt Rating (Side-to-Side) Indoor: 2.5 Degrees | Max Tilt Rating (Side-to-Side) Outdoor: 1.5 Degrees | Max Tilt Rating (Fore and Aft) Indoor/Outdoor: 3.5 Degrees/3.5 Degrees | Platform Extension: 36 in / 91 cm
  • Machine (Rails Raised): 96.3 in / 2.5 m | Machine (Rails Lowered): 77.6 in / 2.0 m
  • Platform: 84 in / 2.1 m | Machine: 94.3 in / 2.4 m
  • Platform: 41.6 in / 1.1 m | Machine. 46 in / 117 cm
  • Elevated (Indoor): 32 ft / 9.8 m | Elevated (Outdoor): 32 ft / 9.8 m | Lowered: 50.9 in / 1.3 m | Railing: 44.6 in / 1.13 m
  • Outside (Indoor): 88 in / 2.2 m | Outside (Outdoor): 88 in / 2.2 m
  • 74 in / 1.9 m
  • 3.9 in / 9.8 cm
  • Platform (Indoor): 705 lb / 320 kg | Platform (Outdoor): 507 lb / 230 kg | on Platform Extension (Indoor): 265 lb / 120 kg | on Platform Extension (Outdoor): 265 lb / 120 kg
  • 3.2 gal / 12 L
  • 5,620 lb / 2,549 kg
  • Refreshed design delivers electric drive, for up to double the battery life of a standard scissor | Reduce operating costs with electric drive and integrated components containing reduced hydraulic hoses and hydraulic fittings on the entire machine. Meaning, increased uptime as well as fewer leaks and service calls. | Work in sensitive areas with optional CleanGuard leak containment system. | Features a standard USB charger and phone holster, improving the operator experience while delivering a high degree of commonality with other JLG® scissors to simplify service. | AC Receptacle in Platform | Active Pothole Protection System | All Motion Alarm | Analyzer Port for Diagnostics | Battery Condition Indicator | CAN-Enabled Charger | ClearSky Smart Fleet™ Hardware (CS550) | Dynamic Braking | Foot-Actuated Deck Extension | Fork Lift Pockets Greaseless Kingpin Joints | Horn | Hourmeter | Lanyard Attach Points | Lifting and Tie Down Points | Load Sensing System | Lubrication Free Scissor Arm Bushings | Manual Descent Cable | Movable, Removable Platform Control | Proportional Controls | QuikFold Rails | Removable Ladder | Scissor Maintenance Prop | Self-Closing Gate | Tilt Alarm and Light | USB Charger & Phone Holder | Variable Tilt Visual Zone Indicato
  • Diamond Tread Steel Deck | Nickel Plated Pins | Steel Swing-Out Doors
  • We provide coverage for one (1) full year, and cover all specified major structural components for five (5) years. Due to continuous product improvements, we reserve the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds applicable ANSI and CSA requirements based on machine configuration as originally manufactured for intended applications. Please reference the serial number plate on the machine for additional information.