2025 JLG® Driveable Stock Pickers 10MSP

Information

2025 JLG® Driveable Stock Pickers 10MSP

Boost your efficiency with the JLG 10MSP. Drivable at full height while picking stock, this machine features a zero turning radius for superior maneuverability, even in narrow aisles.

Its one-hand operation provides increased operator comfort compared to a walkie stalker. And, a built-in automatic battery charger means less downtown during warehouse shifts.

Photos

Highlights

  • Albert Lea, Minnesota
  • 2025
  • JLG®
  • Driveable Stock Pickers 10MSP
  • Available
  • Platform: 20 in / 49.5 cm | Machine (With Bumpers): 32.5 in / 82.5 cm
  • Working: 16 ft / 4.88 m | Machine: 57 in / 145 cm | Ground Entry: 13.75 in / 35 cm

Specifications

  • 2025
  • JLG®
  • Driveable Stock Pickers
  • 10MSP
  • Personnel Lift
  • 4 Brush Direct Electric (Planetary Gear)
  • Non-Marking Caster Wheels: 8 x 2.5 in / 20 x 6 cm
  • Drive & Steer Wheels: 12.62 x 4 in / 32 x 10 cm
  • 4 Sealed 210 amp-hr Maintenance Free (AGM)
  • 25 Amp Automatic
  • Maximum Drive Height: Full Height | Gradeability: 15%
  • Drive (Lowered): 5.0 mph / 8.0 km/h | Drive (Elevated): 0.5 mph / 0.8 km/h
  • Elevated: 10 ft / 3.05 m
  • Working: 16 ft / 4.88 m | Machine: 57 in / 145 cm | Ground Entry: 13.75 in / 35 cm
  • Platform. 27 in / 69 cm | Machine: 61 in / 1.55 m
  • Platform: 20 in / 49.5 cm | Machine (With Bumpers): 32.5 in / 82.5 cm
  • 2 in / 5 cm
  • Platform: 350 lb / 159 kg | Material Tray: 250 lb / 113 kg
  • 1,100 lb / 499 kg
  • Adjustable Height Material Tray | Automatic Five-Hour Battery Charger | Battery Discharge Indicators— Platform and Base | Heavy Duty Planetary Gear Drive Motors | Horn | Hourmeter | Lanyard Attachment Anchor Point | Lubrication-Free Anodized Aluminum Mast Sections | Maintenance-Free Mast Guide System | Non-Marking Tires | Platform Gate Operation Interlock | Point & Go® One-Hand Drive and Steer System | Programmable Motion Alarm | Proportional Drive | Side and Front Bumpers | Simultaneous Lift and Drive Capability | Shipping Skid | Slope Cut-Out Control Interlock | Stand-On Foot Switch Operation Enable Contro | Strobe Lights Front and Rear | Transportation Tie Downs
  • We provide coverage for one (1) full year, and cover all specified major structural components for five (5) years. Due to continuous product improvements, we reserve the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds applicable ANSI and CSA requirements based on machine configuration as originally manufactured for intended applications. Please reference the serial number plate on the machine for additional information.