Engine
Engine Manufacturer
Cummins
Engine Type
QSB4.5L Tier 4 F
Cylinder Liners
4
Displacement
275 cu in. / 4.5 L
Engine Power
Gross Basic: 160 hp / 119 kW
Engine Torque
Maximum @ 1500 rpm: 460 lb ft / 624 Nm
Drivetrain
Transmission
Hydrostatic 2-speed forward and 2-speed reverse
Steering
Integral steer cylinder | Hydraulic power steering with manual backup. | Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
Brakes
Brake System Type
Service brakes are inboard wet disc brake on front and rear axles. | Parking brakes are wet disc spring-applied hydraulic release on front axle.
Wheels & Tires
Wheels
Standard: 17.5 -25 Air CAMSO L2
Operational
Operating Conditions
Drawbar Pull (loaded): 28,500 lb / 127 kN
Operating Speed
Lift (boom retracted): Up 16 sec | Lift (boom retracted): Down 11 sec | Boom Extended: 12 sec | Boom Retracted: 14 sec | Top Travel (4): 17 mph / 28 kph
Hydraulics
Pump Type
Load sense piston pump
Chassis
Axle Count
Trunnion mounted planetary 48° steer axles. | High bias limited slip differential on front axle.
Dimensions
Dimensions
Maximum Forward Reach: 17 ft 7 in / 5.37 m | Frame Leveling: 8 Degrees
Lift Height
Maximum: 33 ft 1 in / 10.1 m
Turning Radius
Outside: 176 in / 4.5 m
Capacities
Cargo Capacity
Rated. 26,600 lb / 12,065 kg
Hitch Lift Capacity
Load at Max Height: 15,500 lb / 7030 kg | Load at Max Reach: 8000 lb / 3628 kg
Fuel Capacity
43 gal / 163 L
Hydraulic Capacity
67 gal / 525 L
Weights
Weight
Operating: 38,775 lb / 17,555 kg
Features
Features
Certified ROPS/FOPS structure | Adjustable seat | Horn | Single joystick controls | Tilt & declutch on joystick | Anti-theft | Volt meter | Hourmeter | Engine oil pressure gauge | Temperature gauge | Fuel gauge | DEF gauge |. Auxiliary hydraulics used for all attachments equipped with cylinders or other hydraulic components
Warranty
Warranty
We provide coverage for one (1) full year, and cover all specified major structural components for five (5) years. Due to continuous product improvements, we reserve the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds applicable ANSI and CSA requirements based on machine configuration as originally manufactured for intended applications. Please reference the serial number plate on the machine for additional information.